6 Month Check Part Number: 000000-1854-761
Pricing: Manually change the price in the CRM Quote to match a Basic Calibration for the particular CMM model and state.
When to Offer: When a customer runs their CMM frequently (high utilization - for example) 24/7), a 6 month check may be of interest. This is standard practice within the “Big 3 Automotive”. The typical scope of work is listed below.
What it is not: This is not a “calibration” or “certification”; the customer will not receive an accuracy protocol ("certificate" and “sticker”). If a mid-year certification is what the customer seeks, then a Basic calibration would be recommended. The Basic could be standard or accredited and will include a protocol, of course. However, a Basic will not include the below scope of work. They are quite simply different.
DURAMAX Note: The 6 month check does not apply. In cases of high utilization (24/7, for example), an additional Complete would be recommended (standard or accredited, depending on customer requirement).
Six Month Check Description
■ CMM Accuracy Quick Check
– 2 spatial measurements (center of measuring volume)
– Perform ring gage scan in three planes (X/Y, Y/Z, X/Z)
■ Compressed air supply, maintenance unit
– Check air connection from plant to CMM
– Adjust working pressure with individual manometer if necessary
– Check and clean the serving unit filter to ensure free of water and oil
– Check all hoses for leak tightness
– Check solenoid valves
– Check of customer preliminary filter if any
■ Visual inspection of CMM/control unit
– Check electrical connections
– Check cables for kinks or wear
– Check plug connections for fit and latching
■ Control cabinet/Control panel
– Check switches/keys for functionality
– Check the pilot lamps
– Replace filter mats of fans if necessary
– Check back-up battery of control PC and replace batteries if necessary
■ Data station
– Check cabling (damage, function)
– Check monitor, touch screen keyboard (damage, function)
■ Control console
– Cable/kink protection
– Functions (display, keys, lamps, etc)
■ Guide ways
– Check and clean dirt accumulation (incl. table( on X, Y and Z)
– Check for signs of abrasion or damage